NANTAI PT101 Top Stop Setting Fixture Tester for kinds of PT D STC HVT type injectors top stop mast stroke and moving column

Top Stop Setting Fixture-All PT (type D), STC (HVT), and Hyperbar Top Stop Injectors.
Measuring fuel injector volume completed, we must test he injector plunger subassembly. (Including STC (HVT) and hypervar top stop injectors).
This Top Stop Setting Fixture used to the test of the injector. After the leakage testing of the injector is completed, the injector can be assembled to the point where the plunger top stop, or plunger travel setting can be made.

Main technical parameters:
1. Working pressure: 550±20KPa(80±3psi)
2. Static weight: 2.3kg(5lbs)
3. Power supply voltage: 220V 50Hz
4. The debugging tolerance: ±0.01mm
5. The scope of verification: ±0.01

Detail Pictures: